Crafco EZ Series II Melter / Applicator |
Crack
Sealing for the 21st Century
|
 |
|
|
| New
Literature - The EZ
Series II 500 is here !!! EZ Series II Literature |
|
| EZ Series II Specifications | |
| The
new EZ Series II is the fourth generation of Crafco melter. It features the best of the EZ-Pour, plus a Heated Hose, Automatic Electronic Controls, and many new features. It has the highest heat efficiency ratio and heats faster than any other melter. It the highest efficiency machine available. The Heat Jacket Fins and the Heat Tower, coupled with the best insulation, provide fast heat-up and recovery time. The EZ Series II options include Heated or Unheated Applicator Hoses, large Air Compressors, Integrated Engine Gauges, and the labor-saving Autoloader. True On-Demand Pumping, gives the EZ Series II the ability to apply Crack Sealants quickly and efficiently. |
|
New Features |
|
|
|
New high energy efficiency air jacket, with heat transfer channels effectively uses more BTU’s providing a fast heat-up and recovery time. |
|
|
New center heat tower heats sealant from all sides. The furthest distance heat must travel is 11 inches, resulting in a faster heat-up time. |
|
|
|
|
|
New self adjusting sliding boom increases operator head clearance to 6’5”, allows for 7’ of travel and increases hose maneuverability. |
|
|
| Single piece constructed frame for balance, durability and towing ease. | All controls are in one location at the rear of the unit. Functions include all engine controls, heated hose with lockouts, and pump flow control. | Provides true “on-demand” pumping for extended pump life, lower operating costs, and less down time. | Side burner access for easy servicing and new high efficiency insulation. | Features a heat damper to control temperature and 20 GPM 2” sealant pump. |
Options |
||
 |
|
 |
Engine Cover,
Overnight Heater, Gravity Feed, Autoloader, 50 or 70 CFM Compressors, |
||
|
Literature and Specifications |
||
| EZ Series II Literature | ||
| EZ Series II Specifications | ||
